Automatic Indexing Chuck
0:20
Automatic Indexing Chuck
455.5K views3 weeks ago
YouTubeOctane Workholding
Old School Machinist Trick for Soft Jaws O.D. 18.1215" - .0015" | I.D. 12.000" - .0020" Chuck 10" Haas ST30 SS | Octane Workholding
0:17
Old School Machinist Trick for Soft Jaws O.D. 18.1215" - .0015" | I.D. 12.000" - .0020" Chuck 10" Haas ST30 SS | Octane Workholding
370.2K viewsMay 9, 2025
FacebookOctane Workholding
Machinist Tips and Tricks | Octane Workholding
1:31
Machinist Tips and Tricks | Octane Workholding
72.3K viewsJan 19, 2025
FacebookOctane Workholding
Machining An Internal Keyway | Octane Workholding
0:31
Machining An Internal Keyway | Octane Workholding
159.8K views10 months ago
FacebookOctane Workholding
Manual Machining beats 5-Axis on this simple one-off part. But the best part is one of our fabricators machined it and I didn't have to! 🤘 | Octane Workholding
0:12
Manual Machining beats 5-Axis on this simple one-off part. But the best part is one of our fabricators machined it and I didn't have to! 🤘 | Octane Workholding
130.5K viewsOct 24, 2025
FacebookOctane Workholding
Machinist Tips Tricks and Tools | Octane Workholding
0:46
Machinist Tips Tricks and Tools | Octane Workholding
152.7K viewsJan 23, 2025
FacebookOctane Workholding
Hope this helps | Octane Workholding
0:36
Hope this helps | Octane Workholding
62K views1 year ago
FacebookOctane Workholding
0:34
Making a Manifold using the Y Axis and Threadmilling | Octane Workholding
28.6K viewsOct 2, 2025
FacebookOctane Workholding
0:10
Old School Boring Bar Trick The Magnet oscillates with the chatter waves counteracting them. | Octane Workholding
602.3K viewsFeb 26, 2025
FacebookOctane Workholding
0:23
Old School Boring Bar Trick With MAQ no tricks are required 😁 | Octane Workholding
162.4K viewsAug 26, 2025
FacebookOctane Workholding
0:22
Inspection Tips-Like anything related to machining, there are dozens of ways to measure. | Octane Workholding
99.5K views10 months ago
FacebookOctane Workholding
0:28
Facing, Parting Off, Drilling, and Turning can all be improved with properly aligned tools. If a lathe has a Y Axis this alignment is simply an offset, but if it does not the machine may need serviced. | Octane Workholding
130.7K views11 months ago
FacebookOctane Workholding
0:15
How it feels hitting tight tolerances 😂 | Octane Workholding
548.8K viewsJul 28, 2025
FacebookOctane Workholding
0:26
The Ignite Clamp in action 🔥 The Ignite Clamp is our solution to holding parts of all shapes and sizes. With the ability to position the clamp at any angle along the T-Slot, square or odd shapes can be held with ease. The wedge clamp design actively pulls downward as the clamp is engaged while simultaneously applying lateral force. This downward force creates a stable condition for machining with no chance of lifting, vibrations, or movement. Shims can be placed under the part when drilling thr
34.3K viewsSep 20, 2024
FacebookOctane Workholding
0:14
Imagine holding any shape or size part, with just a few clamps. The Ignite Clamp by Octane Workholding | Octane Workholding
284.6K viewsNov 1, 2024
FacebookOctane Workholding
0:21
Setting up a vibration dampening boring bar 🤌 Damped tools aren't just for long overhang applications. This 3 to 6 times diameter bar can improve tool life and surface finish in normal operations and is close to the same cost as a standard carbide bar. | Octane Workholding
90.5K viewsApr 8, 2025
FacebookOctane Workholding
0:30
Setting up to cut an Internal Keyway Normally, we would wire edm or broach internal keyways. With this new tool, this can be performed in the lathe easily. | Octane Workholding
126K views11 months ago
FacebookOctane Workholding
0:49
If you need a tool and don't buy it, you'll have paid for it and not have it. MAQ Tools are affordable, excellent, and perfect for every job. | Octane Workholding
109.8K views11 months ago
FacebookOctane Workholding
0:11
On Fanuc based controls, a G84 cycle can be used to rigid tap. Adding a Q. value controls how often and how far the tap retracts before continuing. This can greatly reduce the load on the tap as the chip is allowed to break. The sudden reversal at final depth is often the break point. Breaking this up into several smaller pecks can help mitigate that. Parameter 5200-3 (the third bit counting from the left controls whether the cycle behaves like G73 high speed peck drilling, or G83 full retract p
79.2K viewsJan 22, 2025
FacebookOctane Workholding
0:29
2.00" Drill x 5.00" Deep held by 4 Ignite Clamps🔥 The Ignite Clamp is like having a vise or chuck that adapts to any size or shape part. We routinely hold parts that span the entire table. The 50° angle actively pulls the workpiece downward, helping to stabilize the cut and provide a rock solid hold. Link in Bio | Octane Workholding
86.2K viewsOct 14, 2024
FacebookOctane Workholding
0:17
Banding Trick | Octane Workholding
164.8K views8 months ago
FacebookOctane Workholding
0:22
Collet Blocks are a staple in many machine shops. What makes this block unique is that it can utilize 16C collets up to 1-5/8" diameter. A typical 5C collet is limited to 1-1/8" diameter. All of our 6" vises and bigger lathes were currently in use. You can get a sense for the scale of 16C in a 4" vise and the old South Bend Lathe. 😅 The ability to use a collet to hold a workpiece is beneficial in many ways. Runout is very low in a collet setup, making repeatable clamping easy. The full grip of
128.1K viewsJan 4, 2025
FacebookOctane Workholding
0:46
Good inventions have utility. Great inventions have simplicity. The Ignite Clamp is our solution to holding parts of all shapes and sizes. Having 3 or 4 clamps on the shelf ensures that nearly anything you encounter can be held securely. The 50° clamping angle actively pulls the part down, eliminating potential vibrations. The hardened serrations bite into the material, allowing aggressive cuts to be made as seen in this video. While vises limit how large of part can be held, and lathe chucks ar
164.8K viewsApr 27, 2025
FacebookOctane Workholding
0:33
What's your least favorite material to machine? | Octane Workholding
52.5K viewsOct 22, 2025
FacebookOctane Workholding
0:10
Old School Machinist Trick For Reducing Vibration | Octane Workholding
820.1K viewsJul 11, 2024
FacebookOctane Workholding
1:41
#machining | Octane Workholding
363.7K viewsSep 11, 2024
FacebookOctane Workholding
0:34
Changing tools on our Okuma LB3000 MYW This MT Marchetti tools have an adapter nut that is easy to use for tightening. | Octane Workholding
136.1K viewsJun 19, 2024
FacebookOctane Workholding
0:33
You know its serious when the vises are on their side 😅 | Octane Workholding
94.2K views10 months ago
FacebookOctane Workholding
0:52
Thread Milling produces high-quality threads and has many other benefits. •full control over thread fit •less risk of scrapping a part as the threadmill doesn't become stuck like a tap can if it breaks •less HP required vs. tapping •one tool can produce many threads so long as the pitch matches •repeatable results | Octane Workholding
18.2K viewsOct 3, 2025
FacebookOctane Workholding
1:31
Machinist Tips and Tricks Volume 10 | Octane Workholding
241K viewsJul 20, 2024
FacebookOctane Workholding
See more
Static thumbnail place holder